Instruction
Auovo 6PCS Cup Inserts Mats +3 PCS Knob Cover+5 Meters Car Moulding Strip for Dodge Charger 2015-2023 (3 in 1 Kit)
Thank you for Purchasing our product! If you have any question about this item, such as missing pieces/ receive wrong item/ doesn't fit/ don't know where the liners go etc. , please feel free to email us by support@auovo.com.
LINER FOR THE WIRELESS PHONE CHARGING AREA:
Please note that some of our kits have liners that fit for the wireless charging areas. For the safety, please temporarily remove them while charging your phone. Leaving the Liners in place while charging your phone may cause damage to the liners and it may ineffective charging due to the added thickness of the mat.
1. Clean Before installing
*To get the liners to stay in place, the pockets must be clean before installation.
2. Installing
Follow the installation guide to put the liners to corresponding pockets.
*Some set of liners with a number and L / R for easy installation, “L”=left,“R”=Right.*
*Some liner come with double side tape* You can use them to the liners you need, such as the rear seat fold-able cup holders pieces.
3. Post Install Cleaning
The inserts Liners collect and hold condensation from your bottles, cans or drinks, prevent your cup holders from getting wet, sticky, gooey. Easy to remove it to clean with water.
Shake the dust and crumbs off the liners. Wash them with warm water if needed, then put them in the clean place let them dry naturally.
***Missing pieces? Receive Wrong item? ***
Please contact us : ) by email support@auovo.com
***Extra pieces？***
We include extra pieces to fit all trim levels of the car, it is very possible you have extra pieces.
***Curled Mats? ***
During shipping, some liners may get slightly bent and not sit flat in the compartments. Usually, it will fix themselves over 1-2 weeks by being in a hot car. If you are in a cold climate you may need to use a hair dryer, wash the mat with warm water, or place them on your dashboard in the sun to fix the curling.
6 pieces liners install tips
1x under the dashboard;
1 x Next to the shifter;
2 x front console cup holder;
2x rear seat armrest cup holder
3 PCS Knob Cover
Installation Tips:
The double sided tape is for spare usage.
This rings can be used directly in some trims level without using the double sided tape.
You can try it to the knob. If it must be used the double sided tape to make it work in your vehicle that is supplied maybe used.
- 1. Clean the knob and keep it dry.
- 2. Take off the double-side tape. (Some trims do not to use the double-side tape)
- 3. Carefully press the cover into the knob.
- NOTED: If you need to use the double-side tape. You can use lighter or a hair dryer warm up the tape before install to make it stick better in cold day.
5 Meters Car Moulding Strip
If you have any question during using this item, please feel free to contact us. support@auovo.com